Skip to content
Chambers Service Group plumbing team

Eltham-based plumber · Servicing Melbourne

Leaking Tap Repairs Melbourne

Dripping or leaking taps waste water and can cause damage. We repair taps and replace washers/cartridges.

  • 24/7 emergency service
  • Licensed and insured
  • Usually same-day visits

The Right Fix, From the Start

Chambers Service Group provides straightforward plumbing help with clear communication, tidy workmanship and repairs completed properly. We assess the immediate problem, explain the available options and keep you informed from the first conversation through to final testing and clean-up.

  • Find the source

    We check the tap body, handles, spout, connections and surrounding seals to determine exactly where the water is escaping.

  • Repair the working parts

    Depending on the tap, we can replace worn washers, O-rings, cartridges or valves and restore smooth, reliable operation.

  • Replace unsuitable taps

    Where a tap is badly corroded, damaged or no longer supported, we can discuss a practical replacement that suits the fixture and existing plumbing.

  • Clear next steps

    You get a practical explanation of what we found, what the work involves and any maintenance or follow-up worth considering.

Leaking Tap Repairs Melbourne

Common symptoms

A persistent drip from the spout

A tap that continues dripping when fully closed usually has a worn washer, damaged valve seat or failing ceramic cartridge. The fault tends to worsen and can stain fixtures as well as waste water.

Water leaking around the handle or base

Moisture around the handle, tap base or benchtop may indicate worn O-rings, loose fittings or a failed seal. Water can travel beneath a sink or vanity before the leak becomes obvious.

The handle is stiff, loose or difficult to close

Hard-to-turn handles, excessive movement or a tap that must be forced shut suggest worn internal components, corrosion or mineral buildup that needs attention.

How It Works

  1. 01

    Tell us what’s happening

    Call or submit the form. We’ll ask a couple of questions to diagnose the issue and urgency.

  2. 02

    Upfront quote / approval

    Where possible we provide clear pricing before starting work (no surprise bills).

  3. 03

    Repair + test

    We complete the work, test operation, and leave the site clean.

Where We Help Most

We help with everyday plumbing problems for homes and small businesses across Melbourne.

Chambers Service Group service van

Homes & Apartments

Fast repairs for leaks, blockages, hot water failures, and urgent plumbing issues.

Real Estate & Property Managers

Reliable attendance, documentation, and practical repairs tenants can live with.

Small Business

Fixes that minimise downtime: toilets, taps, drainage, and urgent faults.

Common causes

Worn washers, cartridges and O-rings

The internal sealing components cycle every time a tap is used. Heat, pressure and ordinary wear eventually prevent them from sealing or moving correctly.

Corrosion or mineral buildup

Scale and corrosion can damage valve seats, restrict movement and make components difficult to remove. Older taps may need more than a simple washer replacement.

Loose fittings or damaged connections

Flexible hoses, retaining nuts and threaded connections can loosen or deteriorate. A leak beneath the fixture may therefore continue even when the tap itself is turned off.

Why Choose Chambers Service Group

Licensed & Insured

Qualified trades, compliant work, and peace of mind.

Fast Response

We prioritise emergencies and aim for same-day attendance.

Upfront Pricing

Clear communication on cost and scope before we proceed.

Work Done Right

We focus on durable fixes, not bandaids.

Prevention tips

Close taps gently

Forcing a tap closed compresses washers and strains cartridges without improving the seal. If normal pressure no longer stops the flow, repair the fault rather than tightening harder.

Check beneath sinks and vanities

Occasionally inspect flexible hoses and connections for moisture, corrosion or swelling. Catching a slow leak early can prevent damage to cabinetry and flooring.

Address stiffness and movement early

A loose base or stiff handle places extra stress on internal parts and connections. Servicing the tap before it fails can avoid a larger leak and make repair more straightforward.

Service area

Local to Eltham. Serving homes across Melbourne.

Chambers Service Group provides plumbing support from Eltham across Melbourne. Call or request a quote with your suburb and we will confirm service availability for your location.

Call to check your suburb

Frequently Asked Questions

Is a dripping tap worth fixing?

Yes. A steady drip wastes metered water, can stain the fixture and usually becomes worse as the sealing components wear. Many common tap faults can be repaired without replacing the whole tap.

Do you replace washers and ceramic cartridges?

Yes. The correct repair depends on the tap design. Traditional taps commonly use washers and O-rings, while mixer taps often use a ceramic cartridge. We identify the component and check that a suitable replacement is available.

Why is my tap leaking underneath the sink?

The leak may be coming from a flexible hose, threaded connection, mixer body or the seal where the tap meets the sink. Avoid storing items against the plumbing and arrange a repair before the cabinet is damaged.

Should I repair or replace an old tap?

Repair is often worthwhile when the tap body is sound and parts are readily available. Replacement may be better when the body is corroded, the finish is failing, parts are obsolete or several components are worn.

Can a leaking tap affect water pressure?

A small drip usually does not cause a noticeable whole-house pressure drop, but a blocked aerator or failing cartridge can reduce flow at that tap. Low pressure at several fixtures may point to a different supply issue.

More plumbing services

Need a plumber?

Tell us what is happening.

For urgent plumbing help, call Chambers Service Group now or request a quote to discuss a visit.